Control Settings - GE GCS04 Owner's Manual And Installation

About the control and settings.

Control Settings

The temperature range of the beverage cooler is intended for 41°F to 54°F (± 5°F)/5°C to 12°C (± 3°C).
The display usually shows the average temperature of the appliance at that moment.
NORMAL TEMPERATURE SETTING:
Whenever the appliance is switched on, or the "NORMAL" pad is pressed, the appliance runs on the
"NORMAL" setting of 45°F (7°C) and the "NORMAL" indicator lights.
MANUAL TEMPERATURE SETTING:
The temperature of the beverage cooler can be set anywhere between 41°F to 54°F (± 5°F)/5°C to
12°C (± 3°C). by the temperature up
(1) Press the [SET] pad until you hear a "beep" sound (approximately two seconds).
(2) Press the
one degree.
(3) Press [SET] to confirm your choice - if no pad is pressed within 10 seconds your choice will
be automatically confirmed.
NOTES:
• The "MANUAL" indicator lights while you are manually setting the temperature.
• The temperature display can be changed between Celsius and Fahrenheit by pressing and
holding the
The indicator indicates status of the refrigeration cycle as follows:
(1) It remains ON during the refrigeration cycle;
(2) It remains OFF during the idle cycle.
To switch the interior light on/off, simply press the
When the Beverage Centre is Plugged In
After plugging in the beverage centre, allow it
to reach the set temperature before loading
your beverage. This may take up to 12 hours to
completely stabilize.
and temperature down
pads to increase or decrease the desired temperature in increments of
pad for approximately 2 seconds.
pads as follows:
pad.
After loading the beverage, you may notice a
rise in the temperature. Allow adequate time
for the temperature to return back to the set
temperature. This may take up to 12 hours to
completely stabilize.
www.GEAppliances.ca
5