Notes On Usage; Notes On Printer Usage; Notes On Handling Ink Cartridges - Epson SL-D3000 Operation Manual

Notes on Usage

Notes on Printer Usage

O Do not suddenly change the temperature in the room where this product is set up.
If the temperature changes suddenly, drops of water (condensation) could occur inside the product which may
have an adverse effect on operations.
O Do not place any containers containing water, such as vases or cups, on this product. If water enters the product,
it could cause it to malfunction. Also, do not put any heavy objects on the product.
O Vents have been installed on this product. Vents have been installed to take in and exhaust air from this
product. Do not place any objects near the vent, and do not cover the vent with film sheets or paper and so on.
O Do not use accessories supplied with this product with any other devices.
O Do not print solid white or all white data. Otherwise the paper may be jammed and cause a malfunction.
O The safety device operates if the printer cover is opened while printing, and printing stops automatically.
Printing restarts when the error is cleared from the Client PC.
O If the printer is not used for a long time, after performing "Post-Operation Check" as normal, leave the ink
cartridges installed when storing.
O Contact a technical representative if you are planning to move or transport the printer.
O Do not move this printer by using the Front roll handle.
O Regardless of the operating system settings, computers on your system cannot enter sleep mode.
O Depending on the environment being used, image size, and image type, the print may not be delivered to the
correct tray or sorter. If the prints are not delivered to the correct tray or sorter, or not delivered in the correct
order, remove the ejected paper manually and place in the correct position.

Notes on Handling Ink Cartridges

O If you move ink cartridges from a cold place to a warm place, leave them at room temperature for more than
four hours before use.
O We recommend using the ink cartridge before the expiry date printed on the individual packaging boxes. If you
use an ink cartridge beyond the expiry date, it may affect print quality.
O Do not touch the ink supply port on the ink cartridges. Ink may have leaked from the ink cartridge.
O Because the green IC chip contains the cartridge's own information such as the remaining ink level, you can still
reinstall and use the ink cartridge after removing it from the printer.
O When you remove the ink cartridge before it is expended, store it without getting dirt on the ink supply port.
The ink supply port has a valve in it so it does not need to be capped.
O Do not touch the green IC chip on the ink cartridges. Doing so may prevent normal operation and printing.
Introduction
24