Setting Up Sending Information - Brother NC-8100h User Manual

Important Information
Please ensure that Network
Fax is "Enabled".

Setting Up Sending Information

Brother Network PC Fax can be configured through the Sending tab.
This software can be used in a network environment and with a locally connected
machine. It is important that when used in a network environment the Network
PC Fax is set to enable.
The include header option sends an additional page of information along with fax
or E-mail data which contains user and subject information.
If the Network PC Fax is being used, a private telephone exchange system and an
outside line access number is needed this can be pre programmed in the Dial
Settings on the Sending Information page.
The user has the choice of two interfaces. To change the user interface change
the interface setting above.
Facsimile Style
CHAPTER 14 BROTHER NETWORK PC FAX SOFTWARE
14-4
Simple Style