Table of Contents
Advertisement
1
Additions and Changes to Main Unit Operating Procedures
Forcible Interruption of Recording (P58)
Now you can forcibly interrupt the current recording session
while the <MAIN MENU> screen is displayed. Using this
feature, you can change the menu settings without changing
the current recording conditions.
To interrupt the current recording session:
Press and hold the [SHUTTLE HOLD] button for about 3
seconds.
☞
The recording indicator turns off, and all the recording
mechanisms (normal, timer, and alarm) are switched to
pause mode. During pause, you can change the menu
settings.
While the recording session is paused,
a <--> mark is displayed on the menu screen.
<-->
1.INITIAL SET
2.RECORD SET
3.GENERAL SET
4.SCREEN SET
5.POWER LOSS/USED TIME
6.INITIALIZATION LOG
7.COPY MENU SETTINGS
8.ADVANCED MENU SET
MOVE:JOG
To exit from pause mode:
Press the [EXIT/OSD] button.
☞
You are returned to the same recording status as before
you paused the recording session.
While recording is paused, the DVR does not accept any
new recording command.
If, with the recording session paused, you have
uploaded a menu setting file or a power failure has
occurred, the DVR does not resume the previous
recording status.
English
<MAIN MENU>
->
->
->
->
->
->
->
->
SELECT:SHUTTLE
Changes to the Display of Monitor 2 upon
Alarm Detection (P104)
The following changes have been added to the "MON.2
DISPLAY" item on the <ALARM OPERATION SET> screen
under "RECORD SET".
<ALARM OPERATION SET>
ALARM RETRIGGER
MAIN MON. DISPLAY
ALARM PRIORITY
MON.2 DISPLAY
[Settings] (
indicates default setting)
Setting
When an alarm is detected, the main monitor
NC
does not change.
When a number of alarms occur, the display
SWITCH
switches between the video from the
(added)
corresponding cameras, showing each for one
second.
When an alarm is detected, the main monitor
9
appears in multi 9 screen display.
When an alarm is detected, the main monitor
16
appears in multi 16 screen display.
LAST
When a number of alarms occur, the most recent
(added)
alarm video is given priority and is displayed.
When a number of alarms occur, only the video
FIRST
for the first alarm is displayed. However, if the
(added)
duration for the first alarm expires, video for the
next alarm is displayed.
5
: ON
: FULL
: LAST
(Settings changed)
: NC
Description
Advertisement
Table of Contents
