4
Use
to move the cursor to the
highlighting end point.
•
Text is highlighted as the cursor
passes over it.
5
After highlighting all the text
you want, press
•
This applies the highlighting
and causes the cursor to
change to green (indicating it
is ready to select another start
point).
If you want to highlight more
text, repeat steps 2 through 5.
•
You can highlight up to 10 locations on a single headword screen.
•
To remove highlighting, perform steps 2 through 5 of the procedure
under "Unhighlighting Text" (page 105).
6
Press
•
This displays a Vocabulary
List index.
•
You also can display the
Vocabulary List index by
pressing
<Save>, and then pressing
7
Use
and then press
104
,
,
, and
and then
, selecting
.
and
to select the Vocabulary List you want to save
.
.
.