Connecting Web Viewer - Samsung SRN-1000 User Manual

CONNECTING WEB VIEWER

1. Open your web browser and type the IP address or URL of
NVR into the URL address box.
M
`
"192.168.1.200" is set to IP by default.
`
Set to an available IP address in IP Installer or "Network >
Connection Mode".
`
The URL connection will be enabled only when the DDNS connection settings have been completed.
2. A user with the admin permissions should provide the admin
ID and password. A registered user should provide the user
ID and password.
J
`
The default password can be exposed to a hacking thread so it is
recommended to change the password after installing the product.
`
Set password for your wireless network if you use the product with a wireless router. Being not protected with password or
using the default wireless router password may expose your video data to potential threat.
`
Note that the security and other related issues caused by the unchanged password shall be responsible for the user.
M
`
It allow s up to 10 simultaneous access including the Admin and general users.
`
It does not allow multiple login of the Admin user.
`
The default ID of the admin account is "admin", and the default password is "4321".
`
Password of the Admin and general users can be changed in <Permission Management> menu of the NVR.
`
All settings are applied by the NVR's settings.
3. Click <Install ActiveX Control...>.
4. When the installation confirm message appear, click [Yes]
button.
English _27