Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Fujitsu B22W-5 ECO
Summary of Contents for Fujitsu B22W-5 ECO
- Page 1 Display B22W-5 ECO Operating Manual English...
- Page 2 ... any technical questions or problems? Please contact: • our Hotline/Help Desk (please refer to the enclosed Help Desk list or look up the contact details on our website at: "http://ts.fujitsu.com/support/" • your sales partner • your sales office The latest information about our products, useful tips, updates etc. is available on our website: "http://ts.fujitsu.com/support/"...
- Page 4 Copyright © Fujitsu Technology Solutions 2009 2009/06 Published by Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 München, Germany Contact http://ts.fujitsu.com/support All rights reserved, including intellectual property rights. Technical data subject to modifi cations and delivery subject to availability. Any liability that the data and illustrations are complete, actual or correct is excluded.
-
Page 5: Table Of Contents
FUJITSU B22W-5 ECO Operating Manual Your LCD screen... Important notes Getting started Operation Notes on ergonomic colour adjustment Troubleshooting Notes regarding the DIN EN ISO 13406-2 standard Technical specification... - Page 6 VESA, DDC and DPMS are registered trademarks of the Video Electronics Standards Association. Copyright © Fujitsu Technology Solutions GmbH 2009 All rights reserved, including rights of translation, reproduction by printing, copying or similar methods, in part or in whole. Offenders will be liable for damages.
- Page 7 Contents Contents Your LCD screen............... . Target group .
- Page 8 Contents A26361-K1320-Z220-1-7619, edition 2...
-
Page 9: Your Lcd Screen
Your LCD screen... Your LCD screen... has a whole range of useful features and functions, e.g.: • TFT display (Thin Film Transistor; active matrix) minimal space requirements thanks to slim casing • • optimum ergonomic characteristics (totally distortion-free, excellent picture definition and colour purity right into the corners) •... -
Page 10: Further Information
"Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://ts.fujitsu.com" • Names of CDs, DVDs and titles or designations of other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety" Manual indicates a key on the keyboard, e.g:... -
Page 11: Important Notes
Important notes Important notes Importantnotes Notes In this chapter you will find information regarding safety which it is essential to take note of when working with your device. Safety instructions This device complies with the relevant safety regulations for data processing equipment, including electronic office machines for use in an office environment. -
Page 12: Power Cable
Important notes • The device may only be operated in the wide format (0° landscape mode). The buttons of the control panel are located at the bottom in the middle of the monitor. • Store this manual close to the device. If you pass the device on to third parties, you should pass this manual on with it. -
Page 13: Ce Marking
These savings could also prevent the emission of 20 million tons of carbon dioxide into the atmosphere - equivalent to the discharge from 5 million cars. As an Energy Star Partner, Fujitsu Technology Solutions GmbH has determined that this product meets the Energy Star guidelines for energy efficiency. -
Page 14: Disposal And Recycling
Fujitsu America Inc. Protection Administration 1250E. Arques Avenue Executive, Yuan, R.O.C. Sunnyvale, CA 94085, U.S.A. "http://recycle.epa.gov.tw" Contact: Bernd Henning Phone No.: (408) 329-6737 Fax No.: (408) 746-8299 Information on this subject is also available on the Internet at "http://ts.fujitsu.com/recycling". A26361-K1320-Z220-1-7619, edition 2... -
Page 15: Getting Started
Getting started Getting started Unpacking and checking the delivery The display surface of the device is sensitive to pressure and scratches. Always hold the device by the casing! The complete device package includes: • one monitor • one data cable (D-SUB) •... -
Page 16: Setting Up An Ergonomic Video Workstation
Getting started Setting up an ergonomic video workstation ► Do not position the video workstation opposite a window (1). ► Position the monitor outside the reach of a light source (1). ► Position the keyboard where it is easiest to reach (1). A26361-K1320-Z220-1-7619, edition 2... -
Page 17: Adjusting The Height
Getting started ► Position the monitor so that the eye distance to the screen (1) is around 50 cm. 50 cm ► Position the monitor for optimum viewing (1). The monitor should under no circumstances fall outside the permissible viewing space (2). Depending on the situation, it may be advisable to use a swivel arm or wall bracket (VESA FPMPMI), which are available from specialist dealers. -
Page 18: Removing Monitor Base
Getting started Removing monitor base Before you can use a swivel arm or a wall bracket, you must remove the monitor base. The display surface is susceptible to scratching! ► Switch off the monitor and pull the power plug out of the power socket. ►... - Page 19 Getting started 1 = Power connector 4 = D-SUB socket (ANALOG) 2 = AUDIO-IN socket 5 = Security slot for "Kensington Lock" 3 = DVI-D connector (DIGITAL) 6 = Holes for fixing swivel arm or wall bracket ► Select the data cable which is suitable for your computer. ►...
-
Page 20: Connecting Cables To The Computer
Getting started Connecting cables to the computer Information on the computer connections and interfaces is contained in the operating manual for your computer. ► Connect the data cable to the (active) monitor port on the computer and secure the plug-in connection by tightening the safety screws. ►... -
Page 21: Operation
Operation Operation Switching the device on and off 1 = Buttons for the OSD menu (On-Screen 2 = Power supply indicator Display) 3 = ON/OFF switch Press the buttons upwards from below. The colour of the LED indicator changes as follows: LED indicator Status blue... -
Page 22: Notes On Power Management
Operation ► Switch the device on using the ON/OFF switch. Only switch on the computer after you have switched on the monitor. Notes on power management If your computer is equipped with power management (power-saving mode), the monitor can fully support this function. -
Page 23: Changing The Monitor Settings
Operation Changing the monitor settings When putting the monitor into operation for the first time, the screen display should be optimally adapted to the display adapter used. Changing the monitor settings with the buttons of the control panel The buttons of the control panel have two functions. With the OSD menu not activated, you can make the following settings directly: EXIT / AUTO SELECT/ MENU... -
Page 24: Changing The Monitor Settings Using The Osd Menu
Operation Activate/deactivate ECO operating mode The power consumption of the device can be decreased by reducing the brightness of the picture. ► Press the Forwards / ECO button to switch the ECO operating mode on or off. The message Action was executed appears. If the ECO operating mode is activated, the following OSD settings are changed: Colour 6500 K... - Page 25 Operation ► Press the SELECT/MENU button to activate the OSD menu. The main menu appears, with icons for the setting functions. The first icon, (Brightness/Contrast), is highlighted and the associated functions are visible in the right-hand menu field. ► Press the Forwards / ECO button or button to highlight the Back / INPUT...
-
Page 26: Osd Menu Functions
Operation OSD menu functions The OSD menu for analogue monitor operation is described below. During digital operation some functions are not available, they are not needed because of the digital transmission technology being used. Adjusting the brightness and contrast Call up the Brightness/Contrast setting window Brightness Set the brightness of the display With this function you change the brightness of the background lighting. -
Page 27: Adjusting The Volume
Operation Adjusting the volume Call the Audio setting window Volume Set the volume for playback with the integrated loudspeakers Mute Switch the loudspeakers off or on Setting the colour temperature and colours Call the Colour setting window Select the colour temperature The "warmth"... -
Page 28: Displaying Information
Operation Setting functions in the Advanced menu Call up the Advanced setting window Input select Selecting the input signal This function allows you to switch the monitor from analogue to digital mode and vice versa, when two signal sources are connected. This requires that the graphic card used supports this function. -
Page 29: Notes On Ergonomic Colour Adjustment
Notes on ergonomic colour adjustment Notes on ergonomic colour adjustment If you select colours for the monitor in your application programmes, take note of the information below. The primary colours blue and red on a dark background do not produce the minimum required contrast of 3:1 and are therefore not suitable for continuous text and data entry. -
Page 30: Troubleshooting
Troubleshooting Troubleshooting Should an error occur, first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. If you are unable to solve the problem, please inform our help desk. Having this problem? Check the following points: No screen display... - Page 31 Troubleshooting Having this problem? Check the following points: Picture disturbances (vertical lines) ► Press the EXIT / AUTO button to perform auto-adjustment of the screen. Picture disturbances (horizontal lines, picture ► Press the button to perform EXIT / AUTO noise) auto-adjustment of the screen.
-
Page 32: Notes Regarding The Din En Iso 13406-2 Standard
Notes regarding the DIN EN ISO 13406-2 standard Notes regarding the DIN EN ISO 13406-2 standard Permanently unlit or lit pixels The standard of production techniques today cannot guarantee an absolutely fault-free screen display. A few isolated constant lit or unlit pixels (picture elements) may be present. The maximum permitted number of pixels faults is stipulated in the international standard ISO 13406-2 (Class II). -
Page 33: Technical Specification
Technical specification Technical specification Condensation is not permitted, neither in the rated range of operation nor in the limit range of operation. B22W-5 ECO Dimensions and weight Visible diagonals 55.9 cm Dot pitch 0.28 mm Image size Width 473.76 mm Height 296.1 mm... -
Page 34: Vesa-Ddc-Compatible Vga Interface
Technical specification Environmental conditions Environment class 3K2, DIN IEC 721 Rated range of operation 15 °C ..35 °C Humidity 20 % ..85 % Limit range of operation 5 °C ..35 °C Humidity 20 % ..85 % VESA-DDC-compatible VGA interface Your monitor is equipped with a VESA-DDC-compatible VGA interface. -
Page 35: Sub D Port
Technical specification SUB D port Meaning Video input red Video input green Video input blue Ground Ground Video ground red Video ground green Video ground blue +5 V (DDC) Sync. ground Ground DDC Data H. sync V. sync DDC Clock A26361-K1320-Z220-1-7619, edition 2... -
Page 36: Dvi-D Port
Technical specification DVI-D port Meaning TMDS Data2– TMDS Data2+ TMDS Data 2/4 Shield not connected not connected DDC Clock DDC Data Analog Vertical Sync TMDS Data1– TMDS Data1+ TMDS Data 1/3 Shield not connected not connected +5V Power Earth Hot Plug Detect TMDS Data0–...