How To Insert Batteries Into The Remote Control - JVC DLA-RS65 Instructions Manual

Controls and features (continued)
■ Remote Control
X7
45
To turn off the power
This button sequentially switches
3D formats (Reference page: 63)
(*) This function cannot be used
when inputting 2D and frame
packing 3D signals
Display the 3D setting menu
(Reference page: 63)
Use this function to sequentially
select focus, zoom and shift
adjustment lens controls.
(Reference page: 65)
To hide the image temporarily
(Reference page: 41)
To display/close the menu
(Reference page: 50)
This sequentially switches
between users 1-5.
To adjust color temperature
To set gamma

How to insert batteries into the remote control

①
● If the remote control has to be brought closer to the projector to operate, it means that the batteries are
wearing out.
When this happens, replace the batteries. Insert the batteries according to the
● Be sure to insert the
● If an error occurs when using the remote control, remove the batteries and wait for 5 minutes. Load the
batteries again and operate the remote control.
STAND BY
INPUT
HDMI 1 HDMI 2
3D 3D
FORMAT SETTING
LENS. LENS
CONTROL MEMORY
HIDE
MENU
PICTURE MODE
CINEMA
FILM
NATURAL
STAGE
USER
INFO
COLOR
GAMMA
TEMP
②
end first.
X7
ON
To turn on the power
To select input mode
(Reference page: 36)
COMP .
This sequentially switches anamorphic
modes. (Reference page: 64)
ANAMO.
This sequentially switches the call up/
save/edit modes of your lens memory
(Reference page: 65)
To adjust Lens Aperture
LENS AP.
(Reference page: 57)
To illuminate buttons on the remote
LIGHT
control for 7 second
To select or confirm
To return to the previous menu
BACK
(Reference page: 50)
ANIME
To switch picture mode
3D
Display the information menu
C.M.D.
(Reference page: 73)
Color Space
COLOR PIC.
SPACE ADJ.
Sequentially switched picture
adjust items, such as contrast and
brightness.The switching items are
not the same for different models, or
different picture modes.
③
ENGLISH
marks.
21