Feeding Paper Manually; Using Manual Feed Slot Of The Multi-Function Feeder - Fujitsu PrintPartner 16V User Manual

Handling Paper
2-30

Feeding Paper Manually

This printer allows you to feed sheets manually one by one. Use the
manual feed slot to print a document on a different type of paper
without unloading your regular paper from the paper tray. You also
use manual feed for printing envelopes, overhead transparencies, and
labels.
The manual feed slot is built in the printer. It is also provided in the
multi-function feeder which is standard for the PrintPartner 16ADV
but optional for the PrintPartner 16DV. The procedure is the same.
To use the manual feed slot, first select
tray select mode of the control panel. Next, start your software
program to print a file. Then follow these steps:

Using Manual Feed Slot of the Multi-Function Feeder

Release the paper once it begins to feed automatically. If your file has
additional pages, the printer prompts you for another sheet.
MANUAL FEED ON
1. Adjust the paper guides.
Position the left and right
upper guides to the width
of the sheet. (Lower two
guides are for paper stack.)
2. Place the sheet with print
side face up. When the
printer is ready to print, it
displays the message
INSERT SIZE
you to prepare a sheet of
paper. Insert the sheet until
it is stopped by the feed
rollers. Insufficient insertion
prevents paper from being
fed or causes skewed
feeding.
using the
to prompt
Users Manual