Download Print this page
HP Deskjet 1280 User Manual

HP Deskjet 1280 User Manual

Ciss - continuous ink system
Hide thumbs Also See for Deskjet 1280:

Advertisement

Quick Links

Thanks for your purchasing our continuous ink system for HP Deskjet 1280. Our continuous ink system is
the idea set for inkjet printer which can low down the printing cost. Before your using of CISS, pls kindly
read the instruction with details. In this way, you can install this system without troubles then.
1.General Guide
1)components
A. CIS system 1 set
D.Refill kit 4pcs
2) Opening box for inspection
a. Check whether all the accessories are ready
b. Check whether there is leakage of CIS system, whether the tubes has been separated from CISS.
2.Printer testing
Check whether the printer is in normal condition, such as mechanical status, lubrication
status etc. After installation of this system, it will not low down the printing precision,
so you have no need to worry about that.
3. Installation procedure:
1) first step
Put the CISS on the right side of the
printer,In the mean time, place all the
tubes at correct position ( make sure the
printer and ink tank should be in one level)
2) Set up the CISS system
Open the printer power
CISS for HP Deskjet 1280
B. Air filter
4pcs
E. Instruction CD 1pc
Open the air hole
Open the cover for the printer
C. support arm
2 sets
F. pedestal for drawing air 1set
Place the air filter into the air hole,
make sure that the thicker side is down
the tank
Ink vehicle out

Advertisement

loading

Summary of Contents for HP Deskjet 1280

  • Page 1 Thanks for your purchasing our continuous ink system for HP Deskjet 1280. Our continuous ink system is the idea set for inkjet printer which can low down the printing cost. Before your using of CISS, pls kindly read the instruction with details. In this way, you can install this system without troubles then.
  • Page 2 Open the cover of the ink vehicle Put out the original cartridges 3. Installation of the support arm We have installed the support arm in the cartridges Close the tubes to the support arm by clasp, and make sure the tubes are not contorted 4、Adjust he tubes Pull out the power wire, then move the Ink vehicle...
  • Page 3 And after several times of cleaning, there is still some uncontinuous condition, especially for the single color, you can keep the printer for about one hour, the printer will be ok then.If after testing, still unnormal, you can...
  • Page 4 5. Do not Place the reservoir higher or lower thantherprinter 6. Some color of the printer will leak out for long time no work. If using that printer, will cause some problems then, so before using, pls check whether there is ink in the cartridges, if no, do not open the printer, and send it to be repaired.