Noise appears in the image when you view the screen in a dark place.
The camera is attempting to increase the visibility of the screen by temporarily brightening
•
the image under conditions of low illumination. There is no effect on the recorded image.
The eyes of the subject come out red.
Set [Red Eye Reduction] in the
•
Shoot the subject at a distance closer than the recommended shooting distance using the flash
•
(t step 5 in "Read This First").
Light the room and shoot the subject.
•
The image seen through the finder does not indicate the actual recordable
range.
The parallax phenomenon is occurring when the subject is close. To confirm the recordable
•
range, use the LCD screen.
Dots appear and remain on the screen.
This is not a malfunction. These dots are not recorded (page 5, t "Read This First").
•
Cannot shoot images in succession.
•
The internal memory or the "Memory Stick Duo" is full. Delete unnecessary images (t step
6 in "Read This First").
•
The battery level is low. Install new batteries or charged Nickel-Metal Hydride batteries
(t step 1 in "Read This First").
Viewing images
Refer to "Computers" (page 81) in conjunction with the following items.
Your camera cannot play back images.
•
Set the mode switch to
The folder/file name has been changed on your computer (page 61).
•
When an image file has been processed by a computer or when the image file was recorded
•
using a model other than that of your camera, playback on your camera is not guaranteed.
The camera is in USB mode. Delete the USB connection (pages 59 and 67).
•
The image appears rough right after playback starts.
The image may appear rough right after playback starts due to image processing. This is not a
•
malfunction.
Color unevenness may appear during video playback.
•
This is not a malfunction. Recorded images will not be affected.
(Setup) menu to [On] (page 44).
(page 24).
79