Setting Up A Local Printer Using Sam; Opening The Toolbox Subpanel; Opening The General Toolbox - HP C100/110 Owner's Manual

Setting Up Your Printer

Setting Up a Local Printer Using SAM

Setting Up a Local Printer Using SAM
Follow the instructions in this section to set up a printer that is physically
attached to your workstation.
The procedures in this section require you to log in as root. If you cannot log
in as root, contact your system administrator.
If your workstation is running HP VUE, follow these instructions to set up
your printer using SAM.
1 Log in as root. If you need information on logging in or setting up a user account,
2 Move the mouse pointer to the up arrow above the Toolbox control and click the
Figure 3
3 The Toolbox subpanel opens. Click on the General toolbox icon, shown below.
Figure 4
30
see Using Your HP Workstation.
left mouse button. (This is called a single click, or simply a click.)

Opening the Toolbox Subpanel

Opening the General Toolbox