First, Connect The Print Server And Printer To Your Network - NETGEAR PS121 User Manual

First, Connect the Print Server and Printer to Your Network

Connect the PS121 to your printer.
Ensure that the PS121 power is OFF.
a.
Connect one end of the supplied USB
b.
cable (A) to the PS121, and the other end
to the USB connector on your printer.
Turn on your printer.
c.
Connect the Ethernet cable from the PS121
to a network device like a router.
Insert one end of an Ethernet cable (B)
a.
into an open Ethernet port in the network
device like a hub, switch, or router.
Insert the other end (C) into the Ethernet
b.
port on the PS121.
Your PS121 and printer are now
connected to your network!
Connect the 9v power cord to the PS121,
c.
and plug the the power adapter.
Check the PS121 status lights and verify
d.
the following:
• ACT light: When the print server is
powered on, the ACT light will blink
then turn solid green.
• ERROR light: The ERROR light
should be off.
Setup
User Manual for the NETGEAR PS121 Mini Print Server
Connect thePS121 to your printer
B
Note: Ethernet specifications limit the cable
distance to 328 ft. in length.
A
C
3-3