Display Assembly - HP ENVY 14 Maintenance And Service Manual

3. Remove the speakers (3).
Reverse this procedure to install the speakers.

Display assembly

NOTE: The display assembly spare part kit includes a display panel cable, webcam/microphone
module and cable, and 2 WLAN antenna cables and transceivers.
Description
14.5-in, LED, HD, AntiGlare, flush glass SVA display assembly for use only with Beats Edition
computer models
14.5-in, LED, HD, AntiGlare, flush glass SVA display assembly for use only with standard
computer models
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery cover and battery (see
5. Remove the memory module/wireless module compartment cover (see
on page
6. Remove the top cover (see
70 Chapter 4 Removal and replacement procedures
41).
Top cover on page
Battery on page 36).
49).
Spare part number
654166-001
654165-001
WLAN module