HP CQ60 Series Maintenance And Service Manual page 55

2. Disconnect the two antenna cables 1 from the wireless module.
✎
The black WLAN antenna cable is connected to the WLAN module "Main" terminal. The white WLAN antenna
cable is connected to the WLAN module "Aux" terminal.
3. Remove the two Phillips PM2.0×4.0 screws 2 that secure the WLAN module to the computer. (The edge of the
module opposite the slot rises away from the computer.)
4. Remove the WLAN module 3 by pulling the module away from the slot at an angle.
✎
WLAN modules are designed with a notch
Reverse this procedure to install the WLAN module.
Removal and replacement procedures
4
to prevent incorrect insertion.
4–16