AEG L 87680 FLCS User Manual

Washing machines

Advertisement

Quick Links

EN User manual
L 87680 FLCS

Advertisement

Table of Contents
loading

Summary of Contents for AEG L 87680 FLCS

  • Page 1 EN User manual L 87680 FLCS...
  • Page 2: Table Of Contents

    14. ENVIRONMENT CONCERNS ..........33 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler –...
  • Page 3: Safety Information

    ENGLISH 1. SAFETY INFORMATION Before the installation and use of the appliance, careful- ly read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use cau- ses injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
  • Page 4: Safety Instructions

    SAFETY INSTRUCTIONS • Connect the mains plug to the mains socket only at the end of the installa- 2.1 Installation tion. Make sure that there is access to the mains plug after the installation. • Remove all the packaging and the transit bolts.
  • Page 5: Technical Information

    ENGLISH 2.3 Care and Cleaning cleaning pads, solvents or metal ob- jects. WARNING! Risk of injury or damage to the 2.4 Disposal appliance. WARNING! • Before maintenance, deactivate the Risk of injury or suffocation. appliance and disconnect the mains plug from the mains socket. •...
  • Page 6: Product Description

    4. PRODUCT DESCRIPTION Worktop Feet for the appliance level Detergent dispenser Water drain hose Control panel Water inlet valve Door handle Mains cable Rating plate Transit bolts Drain pump Feet for the appliance level 4.1 Accessories Spanner To remove the transit bolts.
  • Page 7: Control Panel

    ENGLISH 5. CONTROL PANEL Auto Off On/Off button (Auto Off) The AUTO OFF function automatically deactivates the appliance to stop the en- Programme knob ergy consumption when: Display • You do not use the appliance for 5 mi- Start Pause button (Start/Pauza) nutes before you press button Delay start button (Odložený...
  • Page 8 5.3 Display The display shows: The temperature of the set programme Cold water The spin speed of the set programme No Spin symbol Rinse Hold symbol 1) Only available for Spin/Drain programme. Prewash phase Washing phase Rinses phase Spin phase The phase symbols •...
  • Page 9 ENGLISH You cannot open the appliance door when the symbol is You can open the door only when the symbol goes off. If the programme is completed but the symbol stays • The 'Rinse Hold' function is on. • There is water in the drum. The delay start symbol comes on when you set the delay start function.
  • Page 10: Delay Start Button

    10 www.aeg.com The indicator bar is fully filled when you set to the maxi- mum number of rinses. The Stain symbol comes on when you activate the function. The Prewash symbol comes on when you activate the func- tion. The indicator bar is not fully filled when you set only one of the functions.
  • Page 11: Programmes

    ENGLISH 5.11 Acoustic signals function • To deactivate the function, press but- and button at the same You can hear the acoustic signals when: time until the symbol goes off. • You activate the appliance. You can activate the function: •...
  • Page 12 12 www.aeg.com Programme Type of load Cycle de- Functions Temperature Max. weight of scription load Synthetic fabrics Wash SPIN REDUCTION Snadné Žehelení with normal soil. Rinses RINSE HOLD 60 - 0° max. load 4 kg Short spin PREWASH EXTRA RINSE...
  • Page 13 ENGLISH Programme Type of load Cycle de- Functions Temperature Max. weight of scription load Máchání All fabrics. One rinse SPIN REDUCTION 0° max. load 8 kg with addi- RINSE HOLD tives. EXTRA RINSE Spin phase Džíny All items in jeans. Wash SPIN REDUCTION 60°...
  • Page 14: Consumption Values

    14 www.aeg.com Steam Osvěžení Cotton and synthetic up to 1.5 Kg This cycle removes odours from the items. laundry Steam does not remove ani- mal odours. Steam Proti pomačkáni Cotton and synthetic up to 1.5 Kg This cycle helps to dewrinkle the items.
  • Page 15: Before First Use

    ENGLISH Programmes Load Energy Water con- Approxi- Remain- (Kg) consump- sumption mate pro- ing mois- tion (kWh) (litre) gramme ture (%) duration (minutes) Standard 60 0.74 °C cotton Standard 40 0.49 °C cotton 1) At the end of spin phase. Off Mode (W) Left On Mode (W) 0.05...
  • Page 16 16 www.aeg.com Make sure that no laundry stays between the seal and the door. There is a risk of water leakage or damage to the laundry. 9.2 Filling the detergent and additives The detergent compartment for the prewash phase and the soak programme.
  • Page 17: Check The Position Of The Flap

    ENGLISH Check the position of the flap Pull out the detergent dispenser un- til it stops. Press the lever down to remove the dispenser. To use powder detergent, turn the flap up. To use liquid detergent, turn the flap down. With the flap in the position DOWN: –...
  • Page 18: Open The Door

    18 www.aeg.com When the countdown is completed, Press button to start the pro- the programme starts automatically. gramme. The indicator of button is on. Before you press button start the appliance, you can can- The drain pump can operate for...
  • Page 19: Hints And Tips

    ENGLISH • The door lock symbol goes off. – The door stays locked. • Press button – You must drain the water to open the to deactivate the ap- door. pliance. After five minutes from the end of the programme, the energy To drain the water: saving function automatically deacti- If necessary, decrease the spin...
  • Page 20: Care And Cleaning

    20 www.aeg.com • Do not mix different types of deter- use a water softener for washing ma- gents. chines. In areas where the water hard- ness is soft it is not necessary to use a • To help the environment, do not use water softener.
  • Page 21: Door Seal

    ENGLISH • Set the hottest cotton wash pro- After each wash, keep the door open for gramme a while to prevent mould and to let un- pleasant smells go out. • Use a correct quantity of powder de- tergent with biological properties. 11.4 Door seal Regularly examine the seal and remove all objects from the inner part.
  • Page 22: Drain Pump

    22 www.aeg.com Clean the dispenser recess with a brush. Put back the dispenser in the recess. 11.7 Drain pump • The display shows an alarm code be- cause of the problem with water drain. Regularly examine the drain WARNING! pump and make sure that it is Disconnect the mains plug clean.
  • Page 23 ENGLISH When the container is full of water, put the drainage duct back again and empty the container. Do steps 4 and 5 again and again until no more water flows out from the drain pump. Pull back the drainage duct and turn the filter to remove it.
  • Page 24: Emergency Drain

    24 www.aeg.com To clean the water inlet filters: Close the water tap. Remove the water inlet hose from the water tap. Clean the filter in the inlet hose with a stiff brush. Remove the inlet hose behind the appliance. Clean the filter in the valve with a stiff brush or a towel.
  • Page 25: Troubleshooting

    ENGLISH 12. TROUBLESHOOTING The start of the appliance does not oc- • - The appliance does not drain cur or it stops during operation. the water. First try to find a solution to the problem • - The appliance door is open or (refer to the table).
  • Page 26 26 www.aeg.com Problem Possible cause Possible solution The anti-flood de- • Disconnect the appliance. vice is on. • Close the water tap. • Contact the service centre. The spin phase The spin phase is off. Set the spin programme. does not operate.
  • Page 27: Installation

    ENGLISH Problem Possible cause Possible solution The appliance fills The end of the drain Make sure that the drain hose is with water and hose is too low. in the correct position. drain immediately. The washing re- The detergent you used Increase the detergent quantity sults are not satis- was not sufficient or cor-...
  • Page 28 28 www.aeg.com Remove the cardboard top. Remove the polystyrene packaging materials. Remove the internal film. Open the door. Remove the poly- styrene piece from the door seal and all the items from the drum. Put one of the polystyrene packag- ing elements on the floor behind the appliance.
  • Page 29 ENGLISH Remove the polystyrene protection from the bottom. Pull up the appliance in vertical po- sition. Remove the power supply cable and the drain hose from the hose hold- ers. Remove the three bolts. Use the key supplied with the appliance. Pull out the plastic spacers.
  • Page 30: Positioning And Levelling

    30 www.aeg.com WARNING! We recommend that you keep Remove all the packaging and the packaging and the transit the transit bolts before you install bolts for when you move the ap- the appliance. pliance. 13.3 Positioning and levelling • Install the appliance on a flat hard floor.
  • Page 31: Water Drainage

    ENGLISH • Connect the water inlet hose to the cold water tap with 3/4 thread. CAUTION! Make sure that there are no leaks from the couplings. Do not use an extension hose if the inlet hose is too short. Con- tact the service centre for the re- placement of the inlet hose.
  • Page 32 32 www.aeg.com • On the edge of a sink. • Make sure that the plastic guide can- not move when the appliance drains. Attach the guide to the water tap or the wall. • To a stand pipe with vent-hole.
  • Page 33: Environment Concerns

    ENGLISH 14. ENVIRONMENT CONCERNS Recycle the materials with the appliances. Do not dispose symbol . Put the packaging in appliances marked with the symbol applicable containers to recycle it. with the household waste. Return the Help protect the environment and product to your local recycling human health and to recycle waste facility or contact your municipal...
  • Page 34 34 www.aeg.com...
  • Page 35 ENGLISH...
  • Page 36 www.aeg.com/shop...

Table of Contents