Zanussi ZCV551MW User Manual page 16

Removing and cleaning the door
glasses - top oven
The door glass on your product can
be different in type and shape from
the examples you see in the graphic.
The number of glasses can also be
different.
1. Open the door.
2. Hold the door trim on the top edge of the
door at the two sides and push inwards to
release the clip seal.
1
3. Pull the door trim to the front to remove it.
4. Remove the glass panels.
To install panels, do the same steps in reverse.
Removing and cleaning the door
glasses - main oven
The door glass on your product can
be different in type and shape from
the example you see in the graphic.
The number of glasses can also be
different.
1. Push the door trim at one side to remove it.
16
1
2. Pull up the trim.
1
3. Remove the glass panels.
2
Replacing the lamp
Put a cloth on the bottom of the interior of the
appliance. It prevents damage to the lamp glass
cover and the cavity.
1. Deactivate the appliance.
2. Remove the fuses from the fuse box or
deactivate the circuit breaker.
The back lamp
1. Turn the lamp glass cover counterclockwise
to remove it.
2. Clean the glass cover.
3. Replace the oven lamp with a suitable 300
°C heat-resistant oven lamp.
Use the same oven lamp type.
4. Install the glass cover.
2
To replace the glass panels, do the
same steps in reverse. Before you
lower the trim, attach the A trim part
to the door. Refer to the graphic.
WARNING!
Danger of electrocution! Disconnect
the fuse before you replace the
lamp. The lamp and the lamp glass
cover can be hot.
The lamp glass cover is at the back
of the cavity.
www.zanussi.com
A