Watching Two Pictures; Turning Off After A Delay - HP Pavilion md5020n User Manual

Watching Two Pictures

Press the green/PIP button on the remote control one or more times to cycle through these options:
• Overlapping pictures (PIP)
• Side-by-side pictures (POP)
• No second picture
When two pictures are shown, you can control their configuration. The "active picture" is the one with sound
and that sometimes has a border.
To do this...
Find the active picture
Change the size of the active picture
Move the border to the other picture and play its sound
Swap picture positions
Move an overlapping picture (PIP)
Show a different source
Show only the active picture (end two pictures)
NOTE: One of the pictures must be the antenna or cable source. However, you cannot view the antenna
and cable sources at the same time.

Turning Off after a Delay

You can set the TV to play for up to two hours and then automatically turn off.
• To set the sleep timer, press the blue/SLEEP button one or more times to select the delay, and then
press OK.
• To view the timer, press the blue/SLEEP button once.
Press...
or when no border is visible
or
or
OK
Settings, then go to Source > Dual picture > Layout
Source
Green/PIP
Watching a Show 45