Rear Panel Connections - D-Link DSL-G624T User Manual

Rear Panel Connections

All cable connections to the Router are made at the rear panel. Connect the power adapter here to power on the Router.
Use the Reset button to restore the settings to the factory default values in the next chapter for instructions on using the
reset button).
Antenna
For wireless
operation, mount
the antenna on
the threaded
antenna post.
Note
DSL-G624T Wireless A DSL Router User's Guide
ADSL port
Use the ADSL
cable to connect
to the your
telephone line
(RJ-11 port)
Use the Ethernet ports
to connect the Router
to your Ethernet LAN
To manually reboot the Router, disconnect and then reconnect the
power.
Reset button
To manually
reset, depress
button with the
power on for at
least seven
seconds
Ethernet ports
or Ethernet devices
5
Power insert
Use the adapter
shipped with the
Router to
connect to
power source