Table of Contents
Advertisement
Using the On-Screen Display
Use the On-Screen Display (OSD) to display and select OSD menu functions. To access the OSD, do
the following:
1.
Press the Menu button on the side panel to activate the OSD menu.
2.
Use the up arrow or down arrow controls to move clockwise or counterclockwise through the menu.
Press the Enter key on the keyboard, the parameter will be highlighted when selected.
3.
To quit the OSD screen at any time during the operation, press the Menu button. If the OSD remains
untouched for a short period of time, the OSD automatically disappears.
NOTE:
The OSD screen will disappear if no input activities are detected for 45 seconds.
OSD Menu Table
The following table lists the On-Screen Display (OSD) menu selections and their functional descriptions.
Settings will be saved automatically after adjustments are made.
Table 4-2
OSD Menu
Icon
ENWW
OSD Control
Brightness
Contrast
H-Position
V-Position
Phase
Clock
Sharpness
OSD H-Position
OSD V-Position
OSD Time
Color Balance
Auto-Adjustment
Recall Defaults
Description
Increases or decreases brightness.
Increases or decreases contrast.
Adjusts the position of the screen image left and right.
Adjusts the position of the screen image up and down.
Adjusts the focus of the display. This adjustment allows you to remove any horizontal
noise and clear or sharpen the image of characters.
Minimizes any vertical bars or strips visible on the screen background. Adjusting the
Clock will also change the horizontal screen image.
Adjusts the screen image to look sharper or soft.
Moves the OSD position horizontally on the screen. When the up arrow button is
pressed, the OSD menu will move to the right side of the screen. Likewise, when the
down arrow button is pressed, the OSD control menu will move to the left side.
Moves the OSD position vertically on the screen. When the up arrow button is
pressed, the OSD menu will move to the top side of the screen. Likewise, when the
down arrow button is pressed, the OSD control menu will move to the lower side.
Adjusts the amount of time the OSD menu is displayed.
Press the up arrow button or the down arrow button to select 9300, 6500, 5500, 7500
or USER. Only when selecting USER can you make adjustments to the R/G/B (red/
green/blue) content. Press Enter to restore the factory default setting.
Press Auto to enable this function. The Auto-Adjustment will automatically adjust V-
Position, H-Position, Clock and Clock-Phase.
Returns the monitor to its default settings.
Using the On-Screen Display
13
Advertisement
Table of Contents
