Applying Power To The Library; Converting A Rackmount Model (Two-Drive Model Shown) - HP MSL6000 Series User Manual

Figure 16

Converting a rackmount model (two-drive model shown)

Applying Power to the Library

To apply power to the library (see
1. Connect each supplied power cord
NOTE: For four-drive models only, the left-hand AC power receptacle is for the bottom power
supply. The right-hand AC receptacle is for the top power supply.
2. Toggle each power switch
Figure 17):
to each power supply receptacle.
on.
MSL6000 series tape library user guide 35