Chapter -3; Router's Configuration; Configuration Of Pc's Ip Address - D-Link GLB-802C User Manual

CHAPTER-3

ROUTER'S CONFIGURATION

Prior to accessing the router through the LAN/USB port, note the following necessary configurations:
• The PC's TCP/IP address: 192.168.1.x (where "x" is any number between 3 and 254)
• The router's default management IP address:
Ethernet interface: 192.168.1.1
USB interface: 192.168.1.2
• Subnet mask: 255.255.255.0

3.1 CONFIGURATION OF PC'S IP ADDRESS

Set the IP address of the PC in the same network as the Router (For example: Router's IP address:
192.168.1.1/192.168.1.2, Computer network card's IP address: 192.168.1.X, (3~254)) or Set the IP
address setting as 'Obtain IP address automatically"
Below are the procedures for configuring the PC for different operating systems.
Windows XP
1. Access 'Network Connections' from the Control Panel.
2. Right click the Ethernet connection icon, and select 'Properties'.
3. Under the 'General' tab, select the 'Internet Protocol (TCP/IP)' component, and press the 'Properties'
button.
4. The 'Internet Protocol (TCP/IP)' properties window will be displayed.
5. Select the 'Obtain an IP address automatically' radio button.
6. Select the 'Obtain DNS server address automatically' radio button.
7. Click 'OK' to save the settings.
Windows 2000/98SE
1. Access 'Network and Dialing Connections' from the Control Panel.
2. Right click the Ethernet connection icon, and select 'Properties' to display the connection's properties.
3. Select the 'Internet Protocol (TCP/IP)' component, and press the 'Properties' button.
4. The 'Internet Protocol (TCP/IP)' properties will be displayed.
5. Select the 'Obtain an IP address automatically' radio button.
6 Select the 'Obtain DNS server address automatically' radio button.
7. Click 'OK' to save the settings.
D-Link GLB-802C ADSL2+ Router User Manual

CHAPTER -3

.
6