uuIndicatorsu
Indicator
Name
Shift Lever
Position
Indicator
*
Transmission
Indicator
*
Seat Belt
Reminder
Indicator
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
70
On/Blinking
Indicates the current shift lever
●
position.
Comes on for a few seconds when
●
you turn the ignition switch to ON
*1
, then goes off.
(
w
Blinks if the transmission system has
●
a problem.
Comes on and the beeper sounds if
●
you are not wearing a seat belt when
you turn the ignition switch to ON
(
w
*1
.
If the front passenger is not wearing
●
a seat belt, the indicator comes on a
few seconds later.
Blinks while driving if either you or
●
the front passenger has not fastened
a seat belt. The beeper sounds and
the indicator blinks at regular
intervals.
Explanation
2 Shifting P. 320
Blinks while driving - Avoid sudden
●
starts and acceleration and have your
vehicle checked by a dealer
immediately.
The beeper stops and the indicator goes
●
off when you and the front passenger
fasten their seat belts.
Stays on after you or the front
●
passenger has fastened the seat
belt - A detection error may have
occurred in the sensor. Have your
vehicle checked by a dealer.
2 Seat Belt Reminder P. 33
Message
*
—