Fujitsu Eternus DX60 User Manual page 84

Chapter 4 Flow from Installation to Operation
>
P3AM-3042-06ENZ0 ETERNUS DX60/DX80/DX90 Disk storage system User Guide
Basic Setup
Start GUI from the Web browser of the connected PC, and perform the basic setup of the
ETERNUS DX60/DX80/DX90.
Initial Setup
(1)
Perform device initial setup.
•
Set Date and Time
•
Set Storage System Name
•
Change Password
•
Modify the FC Port Mode (only for ETERNUS DX90)
•
Port Parameter Settings
•
Setup Network Environment
Refer
"7.2.1 Initial Setup" (page 140)
Configuration Wizard
(2)
Perform the settings necessary for device operation.
•
Create RAID Group
•
Create Volume
•
Define Host
•
Configure Affinity Group
•
Define LUN Mapping
Refer
"7.2.2 Configuration Wizard" (page 149)
Assigning Hot Spares
(3)
To add hot spares, register them.
Refer
"7.2.3 Hot Spare Registration" (page 160)
84
Copyright 2010 FUJITSU LIMITED