Door Section Identification - Wayne-Dalton TORQUEMASTER 6100 Installation Instructions And Owner's Manual

Door Section Identification

WaRNING labEl
hinges are always pre-attached at the
Tools Needed:
top of each section (except top section).
TOP sECTION
The bOTTOM SECTION can be identified
by the factory attached bottom astragal,
and by the bottom bracket warning labels
WaRNING labEls
on each end stile.
The lOCk SECTION can be identified by
INTERMEDIaTE sECTION
having no labels attached.
The INTERMEDIATE SECTION can be
identified by having warning labels
attached to the right and left end stile.
The TOP SECTION can be identified with
no pre-installed end or center hinges and
lOCk sECTION
the warning label attached in the upper
middle of the section.
bOTTOM bRaCkET
WaRNING labEls
bOTTOM sECTION
asTRaGal
4
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com