Chapter 12 123Scan2
Introduction
123Scan² is an easy to use, PC-based software tool that enables rapid customized setup of scanners by Motorola.
123Scan² uses a wizard tool to guide users through a streamlined set up process. Settings are saved in a
configuration file that can be distributed via e-mail, electronically downloaded via a USB cable, or used to generate
a sheet of scannable programming bar codes.
Additionally 123Scan² can upgrade scanner firmware, check online to enable support for newly released products,
generate a collection of multi-setting bar codes if the number of settings is very large, stage large number of
scanners simultaneously, generate reports with asset tracking information and create custom products.
NOTE See
communication.
The scanner must be connected to the cradle for the host parameter setting to take effect. When the
scanner is not connected to a cradle, and a host parameter bar code is scanned, a long low/long high
beep sequence sounds.
Communication with 123Scan
To communicate with the123Scan² program which runs on a host computer running a Windows XP SP2 or
Windows Vista operating system, use a USB cable to connect the digital scanner to the host computer (see
Connecting an RS-232 Interface on page
Chapter 4, Radio Communications
2
7-2).
for information about scanner/cradle pairing and wireless