Page 1
Overview The following document intends to familiarize one with the use of features in our Smart Classrooms via the Philips Remote Control. The remote itself allows for full control of all devices installed in the room. General Operations Using the Pronto Remote Master MUTE button.
Page 2
Starting up Troubleshooting Blank Screen ! The Pronto screen will be blank when picked up from the charger base. To initiate the Pronto just Touch anywhere on the touch screen as indicated. Where is the main page! Just press on the icon that resembles a house at the top left hand corner of any equipment menu page.
Page 3
Displaying an Auxiliary Video Source Step 1 Connect the AUX video source to the terminals labeled AUX VIDEO on the backsplash. Step 2 Press the AUX VIDEO icon on the main page. STEP 3 Step 3 STEP 2 Press the Show icon to display the video source through the projector.
Page 4
Playing the VCR Step 1 Press the VCR icon in the main menu. STEP 3 The VCR controls page as STEP 1 shown in the right will be displayed. STEP 2 Step 2 Press the PLAY icon. Step 3 Press the SHOW icon to send the VCR video signal to the projector.