Speci Cations - Yamaha IM8-40 Brochure & Specs

Speci cations

Outline
IM8-40 IM8-32 IM8-24
40 32 24
Mic inputs
Phantom
I/O
+48V DC (each channel)
power
Line inputs 4x Stereo
Mixing
40 mono + 4 stereo 32 mono + 4 stereo 24 mono + 4 stereo
channels
Mixing GROUP 8
capability
AUX 8
MAIN Stereo, Mono
MATRIX 4
Compressor(Mic channel only), HPF(80Hz, 12dB/oct), 4-band
Input channel functions
mid-sweep PEQ(4-band PEQ for ST CH)
Others USB Audio I/O
General specifications
IM8 general specifications
IM8-40 IM8-32 IM8-24
Total harmonic distortion Less than 0.1% (20Hz to 20kHz)
Frequency response 0, +1,-3dB(20Hz to 20kHz)
Equivalent
-128dBu
input noise
Hum & noise
level
Residual
-98dBu
noise
Crosstalk Less than -70dB
Power requirements Use PW8 power supply unit
265W 230W 200W
Power consumption
(Use with PW8) (Use with PW8) (Use with PW8)
Width 1716.0mm / 67.6" 1471.5mm / 58.0" 1227.0mm / 48.4"
Dimensions
Height 219mm / 8.7"
Depth 739.0mm / 29.1"
51.5kg / 113.5lbs 44.5kg / 98.1lbs 37.5kg / 82.7lbs
Accessories Owner's manual, Power Supply Link Cable(3m), Cubase AI4
PW8 general specifications
Power requirements AC100V, 120V, 220V, 230V or 240V; 50/60Hz
Power consumption Refer to each host product
Width 480mm / 18.9"
Dimensions
Height 100.5mm / 4.0"
Depth 412.0mm / 16.3"
Net weight 11.0kg / 24.3lbs
For more detailed specifications, please refer to the owner's manual.
Please download the manual from http://www.yamaha.co.jp/manual/english/.
The manual is available in multiple languages.
Input characteristics
Input level
Actual For use
Terminal PAD load with Connector
Maximum
impedance nominal Sensitivity Nominal
before clip
-80dBu -60dBu -40dBu
0 50-600ohm
CH IN A
-36dBu -16dBu +4dBu
XLR-3-31
24ch:1-24 Mics &
3kohms
600ohm type*
32ch:1-32
-54dBu -34dBu -14dBu
40ch:1-40 26dB Lines
-10dBu +10dBu +30dBu
-80dBu -60dBu -40dBu
0
CH IN B
600ohm -36dBu -16dBu +4dBu TRS
24ch:1-24
10kohms
Mics &
Phone
32ch:1-32
-54dBu -34dBu -14dBu
Lines Jack*
40ch:1-40 26dB
-10dBu +10dBu +30dBu
Phone Jack**,
-54dBu -34dBu -14dBu
ST CH LINE IN 600ohm
10kohms
RCA Pin
[1-4]
Lines
-10dBu +10dBu +30dBu
Jack**
CH INSERT IN
TRS
600ohm
24ch:1-24
10kohms -20dBu 0dBu +20dBu Phone
Lines
32ch:1-32
Jack**
40ch:1-40
MASTER INSERT TRS
600ohm
IN (AUX, GROUP, 10kohms -10dBu 0dBu +10dBu Phone
Lines
ST, MONO) Jack**
600ohm Phone
RETURN [1-4] 10kohms -12dBu +4dBu +24dBu
Lines Jack**
RCA Pin
Jack**, 3.5
600ohm
DIA Stereo
2TR IN [L,R] 10kohms -26dBV -10dBV +10dBV
Lines
Phone
Jack**
XLR-3-31
600ohm
TB IN 10kohms -66dBu -50dBu -30dBu
type**
Lines
0dBu = 0.775Vrms, 0dBV = 1Vrms
*: balanced, **: unbalanced
Sensitivity is the lowest level that will produce an output of +4dBu, or the nominal output level when the unit is set
to maximum level.
Output characteristics
Output level
Actual For use
Terminal source with
Connector
Maximum
impedance nominal Nominal
before clip
STEREO OUT [L,R] 75ohms 600ohm Lines +4dBu +24dBu XLR-3-32 type*
GROUP OUT [1-8] 150ohms 10kohm Lines +4dBu +20dBu TRS Phone Jack***
AUX SEND [1-8] 75ohms 600ohm Lines +4dBu +24dBu XLR-3-32 type*
MONO OUT 75ohms 600ohm Lines +4dBu +24dBu XLR-3-32 type*
MATRIX OUT [1-4] 150ohms 10kohms +4dBu +20dBu TRS Phone Jack***
CH INSERT OUT 150ohms 10kohms 0dBu +20dBu TRS Phone Jack**
MASTER INSERT
OUT (AUX, GROUP, 150ohms 10kohms 0dBu +20dBu TRS Phone Jack**
ST, MONO)
DIRECT OUT
150ohms 10kohms 0dBu +20dBu TRS Phone Jack***
(MONO CH IN)
REC OUT [L, R] 600ohms 10kohms -10dBV +10dBV RCA Pin Jack
MONITOR OUT [L, R] 150ohms 10kohms +4dBu +20dBu TRS Phone Jack***
PHONES OUT 100ohms 40ohm phones 3mW 75mW Stereo phone jack
0dBu = 0.775Vrms, 0dBV = 1Vrms
*: Balanced, **: Unbalanced, ***:Impedance balanced
Digital Audio I/O characteristics
Terminal Format Connector
USB USB AUDIO 1.1 USB B type
IM8 Dimensions
198
198 1075.5 198
W: 1471.5
PW8 Dimension & Block Diagram
76.2
44.7
438
32
88 12.5
H: 100.5
300
W: 480
1320 198
H: 219
17
W: 1716
198 831 198
H: 219
17
W: 1227
H: 219
17