NEC Express5800 User Manual page 310

9-20 Upgrading Your Server
2.
See the section "Preparing for Installation and Removal" described earlier to prepare.
3.
Remove the side cover and front bezel.
4.
Remove the 3.5-inch hard disk drive cage.
See the installation procedure of 3.5-inch hard disk drive cage described earlier in this
chapter, perform the reverse to remove the cage.
5.
Remove the four screws, then remove the 3.5-inch hard disk drive cage support bracket.
IMPORTANT: Keep the removed 3.5-inch hard disk drive cage and
support bracket for future use.
6.
Install the 2.5-inch hard disk drive cage support bracket with four screws.
2.5-inch Hard disk
drive cage support
bracket