Services > Audio Gateway Service - D-Link DBT-122 Manual

Bluetooth Configuration
Services > Audio Gateway Service
After two devices are paired (step 1, above), the authentication notification will no
longer appear when a connection is attempted.
If "Always allow..." is enabled during the authorization process (step 2, above), the
authorization notification will not appear on future connection attempts.
Connection notification (step 3, above) only happens if it has been enabled on the
Notifications tab of the individual service being accessed.
Service Access Notification
"Notifications" lets you associate a sound (Windows *.wav file) and/or a visual
indication with access attempts by remote devices.
A different notification sound can be associated with each local Bluetooth service.
Associate a sound with service access
From the Bluetooth Configuration Panel, Local Services tab:
1. Double-click a service name and then select the Notifications tab.
2. Check the desired options; visual and sound may both be selected
for a single event.
3. Choose a sound; click the Browse button and navigate to the sound
file (*.wav) to be used for notification.
To preview the sound file, click the play (
4. Click OK to close the service's property dialog box.
Audio Gateway
The Bluetooth Audio Gateway service allows this computer to use a remote
Bluetooth device's microphone and speakers as this computer's input and
output devices.
For example, if this computer has voice recognition capabilities, a Bluetooth
headset might be used as the audio input device.
Hardware Requirements
•
The Bluetooth radio on both this computer and the remote device
must support audio.
•
The remote device handles both audio input and output for this
computer; therefore, this computer does not require a sound card,
microphone, or speakers.
Configure the Audio Gateway Service
From the Windows system tray, right-click the Bluetooth icon, select
Advanced Configuration > Local Services, and then double-click the Audio
Gateway service.
Set the common configuration properties of the service, and then click OK.
(cont'd)
) button.
38