Change Tv Preferences; Start A Tv Demo; Reset The Tv To Factory Settings - Philips 47PFL4606H User Manual

Change TV preferences

Use the preferences menu to customise your
TV settings.
1
Press .
2
Select [Setup] > [TV settings] >
[Preferences].
3
Select one of the following, then press
OK.
‡ [Menu language]: Select a menu
language.
‡ [Sleep timer]: Switch the TV to
VWDQGE\ DIWHU D SUHGHÀQHG GXUDWLRQ
‡ [Location]: Optimise TV settings for
your location - home or shop.
‡ [E-sticker]: (For shop mode only)
Switch the e-sticker on or off.
‡ [Volume bar]: Display the volume
bar when you adjust the volume.
‡ [Auto switch off]: To conserve
energy, set the TV to switch off
automatically after a period of
inactivity.
‡ [Channel information size]: Change
the type of information that is
displayed when you switch channels.
‡ [Universal access]: Enable or disable
the universal access menu.
‡ [Key beep]: Enable audio feedback
when you press buttons on the
remote control or TV.
‡ [Audio out delay]: Automatically
sync the image on your TV to the
audio from a connected Home
Theatre.
‡ [TV position]: Apply the best
settings for your TV based on how it
is mounted.
‡ [Teletext 2.5]: Enable or disable
Teletext 2.5. (For digital TV)
‡ [Clock]: Display or remove the time
from the TV, and set clock options.
30 EN

Start a TV demo

You can use demonstrations to better
understand the features of your TV. Some
demos are not available on certain models.
Available demos are displayed in the menu list.
1
While you watch TV, press .
2
Select [Setup] > [Watch demo], OK.
3
Select a demo and press OK to view it.
4
To exit, press
Reset the TV to factory
settings
You can restore the default picture and sound
settings of your TV. The channel installation
settings remain the same.
1
Press .
2
Select [Setup] > [TV settings] >
[Factory settings], then press OK.
3
If you are prompted to enter a code,
enter the child-lock code (see 'Set or
change code' on page 23).
» $ FRQÀUPDWLRQ PHVVDJH LV GLVSOD\HG
4
Press OK WR FRQÀUP
.