Table of Contents
Advertisement
Section 4 - Security
Configure WPA/WPA2-Personal (PSK)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before
enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1. Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1).
2. Click on Setup and then click Wireless Settings on the left side.
3. Click the Manual Wireless Connection Setup button.
4. Next to Security Mode, select WPA-Personal
5. Next to WPA Mode, select WPA/WPA2, WPA2 only or WPA only
6. Next to Cypher Type select TKIP, AES or TKIP and AES.
7. Enter the WPA network key you would like to use in the Network Key field.
8. Click Save Settings to save your settings. If you are configuring the router with
a wireless adapter, you will lose connectivity until you enable WPA-PSK on your
adapter and enter the same passphrase as you did on the router.
D-Link DHP-1565 User Manual
139
Hide quick links:
Advertisement
Table of Contents
