Using Remote Codes - Brother MFC-L8600CDW User Manual

Using Remote Codes

Fax Receive Code
If you answer a fax call on an extension
telephone, you can tell your machine to
receive it by pressing the Fax
ReceiveCode l51. Wait for the chirping
sounds then replace the handset (see Easy
Receive on page 48).
If you answer a fax call at the external
telephone, you can make the machine
receive the fax by pressing Fax Start and
then pressing Receive.
Telephone Answer Code
If you receive a voice call and the machine is
in F/T mode, it will start to sound the F/T ring
(pseudo/double-ring) after the initial ring
delay. If you pick up the call on an extension
telephone you can turn the F/T ring off by
pressing #51 (make sure you press this
between the rings).
If the machine answers a voice call and
pseudo/double-rings for you to take over, you
can take the call at the external telephone by
pressing Pickup.
Telephone services and external devices
Changing the Remote Codes
7
The preset Fax Receive Code is l51. The
preset Telephone Answer Code is #51. If you
are always disconnected when accessing
7
your External TAD, try changing the
three-digit remote codes, for example ###
and 999.
a
Press
b
Press All Settings.
c
Swipe up or down, or press a or b to
display Fax.
d
Press Fax.
7
e
Swipe up or down, or press a or b to
display Setup Receive.
f
Press Setup Receive.
g
Swipe up or down, or press a or b to
display Remote Codes.
h
Press Remote Codes.
i
Do one of the following:
 If you want to change the
Fax Receive Code, press Fax
Receive Code. Enter the new
code, and then press OK.
 If you want to change the
Telephone Answer Code, press Tel
Answer. Enter the new code, and
then press OK.
 If you do not want to change the
Codes, go to step j.
If you want to turn the Remote Codes

Off (or On), press Remote Codes.
Press Off (or On).
j
Press .
.
7
7
61