Setting Exposure - Honeywell EQUIP Series Installation And Configuration Manual

Setting Exposure

Document 800-04194V1 Rev A
07/11
®
EQUIP Series ACUIX™ IP PTZ Dome Installation and Configuration Guide
Table 7-1 Minimum Focus Distances by Camera
HDXA - 18× Color
HDXJ - 18× WDR/TDN
HDXF -
26× WDR/TDN
Manual Exposure Control
You can manually control the exposure by selecting a value from 0 through 14,
where 0 is for dark applications and 14 is for bright applications.
To learn more about manual exposure control, see
Manual Exposure Control
To set the exposure:
1. From the OSD main menu, press 5 to select Camera Options.
2. Press 2 to select Exposure Control.
3. Press 2 to select Exposure Level.
4. Type a value from 0 through 14 (default = 7) and then press ENTER.
Auto Slow Shutter
You can set the camera to automatically slow the shutter time when low light is
detected. However, slow shutter times beyond 1/60 s (1/50 s) can cause motion
blurring at low light levels.
To enable/disable auto slow shutter:
1. From the OSD main menu, press 5 to select Camera Options.
2. Press 2 to select Exposure Control.
3. Press 7 to set auto slow shutter to ON or OFF (default).
Wide End
29 cm 80 cm (default)
29 cm 80 cm (default)
32 cm 150 cm (default)
on page 100.
Tele End
About ACUIX PTZ Dome
51