Ipod Setup; Sirius Parental Code Setup - Kenwood DNX9140 Instruction Manual

iPod Setup
Performs setup when using iPod.
D
Display the iPod Setup screen
Touch
[Gt]
> [,...] >
[iPod SETUP]. (page 66)
D
Set each item
[AudioBook Speed] Sets the Audio book
playback speed. (~~ "Normal")
[Wide Screen] Sets Wide Screen on or off.
(0
"OFF")
[On Screen iPod] Sets an on-screen display of
the iPod Playback screen. ([~ "Auto")
"Auto": Information is displayed for 5 seconds
when updated.
"Manual": Information is displayed when you
touch on the screen.
~
~
• "Wide Screen" cannot be set while the iPod is connected.
SIRIUS Parental Code Setup
Sets a SIRIUS Parental code.
D
Display the SIRIUS Setup screen
Touch
[Cit]
> [,...] >
[SIRIUS SETUP]. (page
66)
D
Display the Parental Code screen
~
~
If you have already completed the code registration,
[Change] is displayed.
If you want to clear the code which has already been
registered, touch [Clear] .
• Pressing [Clear] for 5 seconds or longer deletes the
code.
D
Enter the current code number
[I]
Enters a code number.
[Cancel] Cancels the current setup and returns
to the SIRIUS Setup screen.
[Enter] Registers the enetered code number
and displays the Parental Code 1st screen.
[Clear] Clears the code number.
~
~
• If you are to register the parental code for the first
time, this screen will not appear. Go to Step 4.
Nextpage~
English 87