Advertisement
Appendix A
Dynamic IP address setup
Used when a DHCP server is available on the local network (e.g.,
a Router).
Select Obtain an IP address
automatically (if the wireless
router or access point has
DHCP server enabled).
Select Obtain DNS server
address automatically.
Click OK
Static IP address setup
Used when a DHCP server is not available on the local network.
Select Use the following IP
address
IP address: 192.168.0.28
Subnet Mask: 255.255.255.0
Input a static IP address in the
same range as the wireless router
or access point.
Click OK
14
Advertisement
