Buffalo AirStation WZR-900DHP User Manual page 100

Step 2: Connect the Wireless Bridge to the AirStation
1
Press the mode button 3 times (once per a second) and wait for about a minute.
After a minute, confirm that the LEDs appear as below:
Power/Diag LED: lit red
Wireless LED: blinks orange
Internet Access LED: off
Router LED: off
Note: If the LEDs do not appear as above, press the mode button some times until the LEDs appear as above.
2
Change the PC's IP address to "192.168.11.xxx" (e.g. 192.168.11.135).
3
Connect the wireless bridge to the PC with an Ethernet cable.
4
Open a web browser and enter "192.168.11.100".
100