Advertisement
Inputting Characters
Inputting Alpha Characters
Use the keyboard to input alpha characters.
Example: To input the word "internet"
1
Press the keyboard keys to input the term.
•
In this example, press:
•
Note that all alphabetic characters are input in lower case, regardless
of their normal capitalization.
•
To input an accented character (ä,ö,ü), press
applicable character key.
•
When inputting any accented letter in French, just input the letter
without its accent.
Inputting Numbers
You can input numbers only on the calculator screen. Entering the
Calculator mode automatically changes the keyboard to a number
input keyboard.
Language Settings
You can use the procedure below to switch the language used for
screen messages, titles, icons, etc. between German and English.
The initial factory default setting is "Deutsch" (German).
1
While the initial MENU screen or the initial screen of any
dictionary (mode) is on the display, press
•
This displays a screen for confi guring settings.
•
If you press
while the initial MENU screen is displayed, all
available settings will appear for confi guration.
•
If you press
while the initial screen of a dictionary (mode) is
displayed, all settings except for the language setting will appear.
Basic Operation
Selecting a Mode
You can select a mode either by performing the applicable mode
key operation or by using the MENU screen.
Selecting a Mode Using a Mode Key
You can access Multiple Dictionary Search, the English-German
dictionary, German-English dictionary, French-German dictionary,
or German-French dictionary by pressing the applicable key.
To access the English-English dictionary, French-French dictionary,
or calculator, you need to press
To select a mode using the MENU screen
You can use this procedure to select any mode except the
calculator mode.
1
Press
.
•
This displays the MENU screen.
Quick Reference Guide
.
and then press the
.
and then the applicable key.
Correcting an Input Error
You can use any of the following methods to correct input errors
and to modify input.
Deleting a Character
1
Use the
and
cursor keys to move the cursor to the
character you want to delete.
2
Press
.
•
This deletes the character to the right of the current cursor position.
•
Pressing
while the cursor is located to the right of the last input
character deletes the character to the left of the cursor.
Inserting a Character
1
Use the
and
cursor keys to move the cursor to the
location where you want to insert the character.
2
Input the character.
•
This inserts the character at the current cursor position.
2
Use
and
to move the highlighting to
"Gerätekonfi guration" (Confi guration) and then press
•
This displays the screen for confi guring settings.
3
Use
,
,
, and
"Spracheneinstellung" (Language Settings), and then
press
.
4
Use
and
to move the cursor ( ) to the setting you want,
and then press
.
2
Use the
and
cursor keys to
move the highlighting to tab of
the category for the dictionary
(mode) you want to select.
3
Use
and
cursor keys to
move the highlighting to the mode you want to select.
4
Press
.
•
This displays the initial screen of the
dictionary (mode) you selected.
EW-G300
to move the highlighting to
.
Advertisement
