Basic Remote Control Operations For Other Components; Registerrng Setup Codes For Other Components - Kenwood VR-6070 Instruction Manual

Basic remote control operations for other components
The remote control supplied with this receiver is also capable
of controlling components from a variety of manufacturers
once you register the appropriate setup codes into the
remote control unit.
Low battery warning
Replace all two batteries with new ones when you notice a shortening
of the distance from which the remote control will operate The
remote control is designed to retain setup codes In memory while you
change batteries
Registering setup codes for
other components
SOURCEeJ
REMOTE MODE-"":":"!'=;;::;;::I
~*,"-Numeric
keys
D
Find the setup code of the component to be registered.
• Refer to ti,e setup code lists to find the setup code for the
component to be registered.
-,jot - ~i
Example To register a DVD made by KENWOOD, you would enter
"S05"
Input Component Maker Code Key
IDVDI
DVD player
KENWOOD 805, 808 DVD
fJRegistering components for REMOTE MODE [(DVD, CBL,
DSS/SA
T,
VCR, TV, OTHERS - RC-R0813/R0814) or (OVD, CD,
CBLlSAT, VCR, TV, OTHERS - RC-R0815)} keys.
o
For DVD, CD, CBL, DSS/SAT, CBL/SAT, VCR or TV keys;
Hold down the SOURCE
eJ
key and press the numeric keys to
enter the setup code.
• Example: Press "805" to register a DVD player manufactured by
KENWOOD
• If you push an Invalid key, the remote control will display
"ERROR" and exit the setup mode
o
The OTHERS key enables you to operate another OVD, CO,
CBL. DSS/SAT. CBL/SAT, VCR or TV component.
For OTHERS key;
Hold down the OTHERS key and press the numeric keys to
enter the setup code.
• Example: After you have registered the KENWOOD DVD player,
press" 804" to register another DVD player which is manufactured
by Panasonic.
• If you push an invalid key, the remote control will display
"ERROR" and exit the setup mode
ElPress any of the REMOTE MODE key and then press the
SOURCE eJ key to check that the component you want to
control turns on.
If the component does not react, and there is more than one
setup code, enter another setup code and try again.
• If tl,e component is already on, pressing the SOURCE
eJ
key will
turn it off.
~
Repeat steps
EJ
to
EJ
to register additional components until
all components have been registered.
Alternative REMOTE MODE key.
This operation is optional and is convenient when you link an INPUT
SELECTOR key to the REMOTE MODE key. While operating one
component. the INPUT SELECTOR key functions as an alternative
REMOTE MODE key to select another component.
• Example: REMOTE MODE (DVD) key can be linked to the INPUT
SELECTOR (VIDEO 11 key as described below;
o
After registering the setup code, press and hold the SOURCE
eJ
key and then press the REMOTE MODE IOVD) key.
o
While holding down the SOURCE
eJ,
press the INPUT
SELECTOR (VIDEO 1) key.
• Now the VIDEO 1 key will function as a DVD key which can be
selected at the same time while operating a CD player.
• Repeat step
0
to
0
to link other INPUT SELECTOR keys.
Note
Although each setup code is designed to work with a number of
different models, certain codes may not work with some models.
(Also, certain codes may only operate some of the functions available
on a given model.)