Cisco SF500-24 Administration Manual page 89

General Administrative Information and Operations
Traceroute
STEP 3
Cisco 500 Series Stackable Managed Switch Administration Guide
• TTL—Enter the maximum number of stops that Traceroute permits. This is
used to prevent a case where the sent frame gets into an endless loop. The
Traceroute command terminates when the destination is reached or when
this value is reached. To use the default value (30) select Use Default.
• Timeout—Enter the length of time that the system waits for a frame to return
before declaring it lost or select Use Default.
Click Activate Traceroute. The operation is performed.
A page is displayed showing the Round Trip Time (RTT) and status for each trip in
the fields:
• Index—Displays the number of the hop.
• Host—Displays a stop along the route to the destination.
• Round Trip Time (1-3)—Displays the round trip time in (ms) for the 1-3rd
frame and the status of the 1-3rd operation.
6
80