General Information; Disassembly - Pioneer AVX-P7700WES Service Manual

7. GENERAL INFORMATION

7.1 DISASSEMBLY

- Removing the Case
1. Remove the screw A.
2. Insert a pair of tweezers in the holes marked with
black arrow to remove the case. Remove the case
carefully because it is easily deformed.
- Removing the Grille Unit
1. Pull out the monitor toward you.
2. Remove two screws B.
3. Remove the stoppers marked with white arrow to
remove the grille unit.
Grille Unit
B
Monitor Section
- Removing the Monitor Section
1. Pull out the monitor section until it comes to the
stoppers.
2. Remove four screws C to remove the monitor sec-
tion.
C
C
Monitor Section
Case
A
B
C
C
- Removing the Display Assy
1. Remove two screws D, screw E and the cover in this
order.
2. Disconnect a connector and pull out the display assy
toward you.
D
Display Assy
- Removing the Encoder PCB
1. Disconnect the six connectors illustrated below.
2. Unsolder the encoder PCB and the catches.
3. Straighten the two catches marked with arrow and
remove the encoder PCB.
AVX-P7700W
Cover
D
E
Connector
Encoder PCB
67