Package Contents Local Unit (L), Remote B B B B B B B B L L L L R R R R R R Unit (R) or Both (B) 1 or 2 External Power Supplies (Input: 100- 2 2 2 2 2 2 2 0 1 1 1 1 1 1 1 1 1 1 240 V, 50/60 Hz, 0.5 A Output: 5 V, 2 A) Mounting Hardware...
Product Features • Support a maximum resolution of 1920 x 1440 @ 60 Hz. • All operating systems supported. • Plug and play; no software or drivers required. • HDCP compliant. B130-101-2 • Extends a VGA video signal (1024 x 768 @ 60 Hz) up to 1,000 ft. from the source. • Features an additional VGA port, allowing for the connection of a local monitor. • Includes mounting hardware that allows units to be wall-mounted, rack mounted or pole mounted. • Features built-in equalization and gain controls to adjust the video image. • EDID copy feature ensures optimal display compatibility. B130-101A-2 • Extends both a VGA video (1024 x 768 @ 60 Hz) and an audio signal up to 1,000 ft. from the source. • Features additional VGA and 3.5 mm ports, allowing for the connection of a local monitor and speakers.
Product Features continued B130-101A-WP-1 • Extends both a VGA video (1024 x 768 @ 60 Hz) and an audio signal up to 1,000 ft. from the source. • Includes a VGA + audio splitter cable, which allows for the connection of a local monitor and speakers. • Includes RJ45 jacks, allowing for easy connection via standard patch cables; no 110 punchdown connections required. • Features built-in equalization and gain controls to adjust the video image. B130-101S-2 • Extends both a VGA video (1024 x 768 @ 60 Hz) and RS-232 Serial signal up to 1,000 ft. from the source. • Includes mounting hardware that allows units to be wall-mounted, rack mounted or pole mounted. • Features built-in equalization and gain controls to adjust the video image. • EDID copy feature ensures optimal display compatibility. B130-111 • Kit comes with both local transmitter and remote repeater units.
Product Features continued B130-111A • Kit comes with both local transmitter and remote repeater units. • Locate multiple monitors/speakers at different points in a chain of up to 2,000 ft. by connecting an additional remote receiver unit (B132-100A or B132-100A-WP-1), or a remote repeater unit (B132-110A). • Up to 4 remote units (3 remote repeaters and 1 receiver) can be connected together, providing audio/video to up to 4 remote displays/ speakers in a full chain. • Extend a 1024 x 768 (60 Hz) video and audio signal up to 1,000 ft.
Product Features continued B132-002-2 • Works with the B132-100-1 and B132-100-WP-1 remote units to extend a VGA video signal (1024 x 768 @ 60 Hz) up to 1,000 ft. from the source. • Able to transmit a single VGA video signal to 2 monitors. • Includes mounting hardware that allows unit to be wall-mounted, rack mounted or pole mounted. • EDID copy feature ensures optimal display compatibility. B132-002A-2 • Works with the B132-100A and B132-100A-WP-1 remote units to extend both a VGA video (1024 x 768 @ 60 Hz) and an audio signal up to 1,000 ft.
Product Features continued B132-004A-2 • Works with the B132-100A and B132-100A-WP-1 remote units to extend both a VGA video (1024 x 768 @ 60 Hz) and an audio signal up to 1,000 ft. from the source. • Features additional VGA and 3.5 mm ports, allowing for the connection of a local monitor and speakers. • Transmits a single VGA video and audio signal to up to 5 sets (4 remote, 1 local) of monitors and speakers. • Expand the number of connected monitors/speakers to up to 25 (24 remote, 1 local) by daisy chaining up to 6 local units together.
Product Features continued B132-110 • Both extends and expands your Tripp Lite VGA over Cat5 installation, allowing you to locate multiple monitors at different points in a chain of up to 2,000 ft. • Up to 4 remote units (3 remote repeaters and 1 receiver) can be connected together, providing video to up to 4 remote displays in a full chain. • Extend a 1024 x 768 (60 Hz) signal up to 1,000 ft. between the local transmitter and the first remote repeater unit in the installation. • Extend a 1024 x 768 (60 Hz) signal up to an additional 1,000 ft. from the first remote repeater unit to the last display in the installation, for a maximum extension distance of 2,000 ft.
Note: The images below show a B140-101X DVI Extender, but mounting is the same for the VGA Extenders. The B132-004-2 and B132-004A-2 can also be mounted to a Tripp Lite B132-004-RB 1U rackmount bracket. Up to 3 B132-004-2 or B132-004A-2 local units can be connected to a B132-004-RB.
Installation EDID Copy Compatibility issues can occur when EDID information is not properly communicated between the source and the display. Select models include an EDID copy feature which stores a monitor’s EDID information in the transmitter and sends it to the source, ensuring optimal compatibility.
Page 13
Connect the external power supply to the transmitter unit and plug it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS). Wait 10 seconds for the EDID information to be copied, and then disconnect the monitor from the transmitter unit’s input port and...
Skew cable, such as Tripp Lite P524-01K. For the B130-101-U, use Zero-Skew cable for distances between 250 and 500 ft. 5. To achieve maximum resolution, it is recommended that you use Tripp Lite P502-Series VGA video or P504-Series VGA video and audio* cables with RGB coax.
Page 15
RS-232 Serial port. Connect the external power supply to the transmitter unit, and then plug it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS). The B130-101-U gets power from the USB cable built-in to the transmitter unit and doesn’t require external power supplies.
Page 16
DB9 cable. Connect the external power supply to the receiver unit, and then plug it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS). The B130-101-U gets power from the USB cable built-in to the transmitter unit and doesn’t require...
For optimal image quality between 500 and 1,000 ft., use Zero- Skew cable, such as Tripp Lite P524-01K. 5. To achieve maximum resolution, it is recommended that you use Tripp Lite P502-Series VGA video or P504-Series VGA video and audio cables with RGB coax.
Page 18
Repeat step 7 for each receiver unit in the installation. Connect the external power supply to the receiver unit, and then plug it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS). Repeat step 9 for each receiver unit in the installation.
For optimal image quality between 500 and 1,000 ft., use Zero- Skew cable, such as Tripp Lite P524-01K. 5. To achieve maximum resolution, it is recommended that you use Tripp Lite P502- Series VGA video or P504-Series VGA video and audio cables with RGB coax.
Page 20
Connect the external power supply to the first transmitter unit in the installation, and then plug it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS). Repeat step 6 for each additional transmitter unit in the installation.
Installation continued Extender/Repeater Kit Installation (B130-101-2, B130-101A-2, B130-111 and B130-111A) Note: 1. For models that support EDID copy, perform the EDID copy procedure described in this manual prior to installation. 2. An extender/repeater kit installation can start with a B130-101-2, B130- 101A-2, B130-111 or B130-111A.
Page 22
The use of stranded wire Cat5e/6 cable, or cable with a gauge (AWG) size higher than 24 AWG, will result in shorter extension distance. All Tripp Lite N202-Series cables are made with 24 AWG solid-wire cabling. Tripp Lite N022-01K-GY (Cat5e) and N222-01K-GY (Cat6) are 24 AWG solid-wire bulk cables.
Page 23
OUTPUT port(s) using a VGA video and audio* cable. Connect the external power supply to the remote repeater unit, and then plug it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS). The Red power LED and the Green RJ45 LED will illuminate to indicate the unit is receiving power.
Installation continued Non-Kit Remote Repeater Installation Note: 1. For models that support EDID copy, perform the EDID copy procedure described in this manual prior to installation. 2. The diagram above shows a B132-004-2 installation with the maximum number of remote units connected. A B132-004A-2 installation will be the same, except there will be audio connections.
Page 25
The use of stranded wire Cat5e/6 cable, or cable with a gauge (AWG) size higher than 24 AWG, will result in shorter extension distance. All Tripp Lite N202-Series cables are made with 24 AWG solid-wire cabling. Tripp Lite N022-01K-GY (Cat5e) and N222-01K-GY (Cat6) are 24 AWG solid-wire bulk cables.
Page 26
OUTPUT port(s) using a VGA video and audio* cable. Connect the external power supply to the remote repeater unit, and then plug it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS). The Red power LED and the Green RJ45 LED will illuminate to indicate the unit is receiving power.
Installation continued Non-Kit Daisy Chain Remote Repeater Installation (B132-004A-2 and B132-004-2 only) Note: 1. For models that support EDID copy, perform the EDID copy procedure described in this manual prior to installation. 13-04-119-93-3289.indd 27 4/26/2013 2:00:26 PM...
Page 28
The use of stranded wire Cat5e/6 cable, or cable with a gauge (AWG) size higher than 24 AWG, will result in shorter extension distance. All Tripp Lite N202-Series cables are made with 24 AWG solid-wire cabling. Tripp Lite N022-01K-GY (Cat5e) and N222-01K-GY (Cat6) are 24 AWG solid-wire bulk cables.
Page 29
Installation continued Connect the external power supply to the first transmitter unit in the installation, and then plug it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS). The Red power LED and the Green RJ45 LED will illuminate to indicate the unit is receiving power.
Page 30
VGA video and audio* cable. Connect the external power supply to the receiver unit, and then plug it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU) or Uninterruptible Power Supply (UPS). Repeat steps 6 through 14 for each additional RJ45 OUTPUT port on each of the transmitter units, and then proceed to step 15.
5. What resolution are you trying to reach? Tripp Lite’s VGA over Cat5 extenders are tested to support up to 1920 x 1440 @ 60 Hz video resolution (See the Product Features section in this manual for details on max distance and resolution).
Page 32
Tripp Lite’s VGA over Cat5 extender products. 7. Is your Cat5e/6 cabling wired to TIA 568B? Tripp Lite’s VGA over Cat5 extender products have been tested using Cat5e/6 cabling wired to TIA 568B (all Tripp Lite Cat5e/6 cables are wired to TIA 568B).
Page 33
Troubleshooting continued 10. Check your cabling for any damages that may have occurred during installation. If a cable connector is loosened from pulling through ceilings/walls, or the cable jacket is damaged causing the wiring to be exposed, you will not be able to achieve maximum performance. 11. Are the transmitter, repeater and/or receiver units located in an area that exposes them to elevated temperatures? If the product is overheating, it will not function properly.
TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center.
• Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications to this equipment not expressly approved by Tripp Lite could void the user’s authority to operate this equipment. WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union) Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to: • Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country) • Send the new equipment back for recycling when this ultimately becomes waste Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. 13-04-119-93-3289.indd 35 4/26/2013 2:00:26 PM...
Page 36
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support 13-04-119 • 93-3289_revA 13-04-119-93-3289.indd 36 4/26/2013 2:00:26 PM...