Table of Contents
Advertisement
Introduction
Thank you for selecting the Honeywell remote rain gauge TS906.This product is a part of
the Professional Weather Station TE923W. It measures rainfall amount and transmits data
to a TE923WD (main display unit).
Note: In order to display the rainfall amount and related items, you must own a main
display unit (TE923WD) for the Professional Weather Station TE923W.
In this package you will find:
One Rain Gauge (remote rain sensor/transmitter) (TS906)
Mounting Hardware
One User Manual
Standard Package Contents
Picture
4 screws for securing rain gauge to the flat
surface
Installation
All data measured by the rain gauge is transmitted to the main unit wirelessly, with the
operating range up to 100 feet (30 meters) in the open area.
Remote rain gauge must be placed outdoors to measure precipitation.
Note: It is critical to power up and test communication between the remote rain gauge
and the main unit BEFORE permanently mounting it outside.
Before you begin
•
We recommend using alkaline batteries for the remote rain gauge when
temperatures are above 32°F (0°C) and lithium batteries when temperatures are
below 32°F (0°C).
•
Avoid using rechargeable batteries. (Rechargeable batteries cannot maintain
correct power requirements).
•
Insert batteries before first use, matching the polarity in the battery compartment
•
During an initial setup, place the main unit close to the remote rain gauge.
Components
Rain Gauge consists of:
Funnel shaped top with battery
compartment
Rain Gauge bucket
Bucket see-saw mechanism
Protective screen
Mounting hardware
3
Advertisement
Table of Contents
