Sharp VC-A565U Service Manual page 75

Ref. No. Part No.
FRONT PANEL PARTS(VC-A565U)
F
E
D
C
B
500-6
A
1
PRECAUTION ON FRONT PANEL SET-UP
Cassette cover
open lever
Before attaching the front
panel in position, make
sure that the cassette cover
open lever is in its right
place (lower-most). If it is
out of position, push it down
with a finger.
Description Code
500-7
500
500-4
2 3
Cassette housing
Cassette cover
open lever
Keep the cassette over about
45 open and make sure that
the cassette cover open le-
ver is between the front panel
and the cassette cover. Now
fix the front panel in place.
Ref. No. Part No.
500-3
500-1
4
Front panel
Cassette cover
Cassette cover
open lever
About 45
Do not mount the front
panel with the cassette
cover tilted too open.
Otherwise the cassette
cover might wrongly run
on the cassette housing.
81
VC-A565U/H965U
Description
501
500-11
502
5 6
Cassette cover
3
4
1
2
5
Removing the cassette compartment cover.
1 Open the cassette compartment cover
fully.
2 Remove the center positioner.
3 Slide the cover to the right.
4 Slightly bend the cover.
5 Draw out the left-side rod.
Code