Cooling Unit - Sharp SJ-44L-WH1 Service Manual

(3) Installing of Evaporator
(3)-1. Install Evaporator as shown in Fig. A-16 in the
reverse order of Fig. A-17.
(3)-2. Correct the deformed fin.
NOTE
1. When installing Evaporator, take care not to
deform significantly and break the pipes.
2. Take care not to damage the lead wires and hurt
yourself by the fin of Evaporator.
Mark: Refrigerant flow
Mark: Brazing portion
Hot pipe L
(Side condenser)

COOLING UNIT

Hot pipe Hot pipe R
(DP-condenser) (Side condenser)
Figure C-1. Cooling unit
Evaporator
Suction pipe
Eva-pan pipe
Compressor
Dryer
21
SJ-44L
SJ-48L
Back condenser
Capillary tube