Power Section; C. Assembly Procedure; B. Disassembly Procedure; Duplex Motor Section (Rspf Model Only) - Sharp AL-1661CS Service Manual

12) Disconnect the connectors.
13) Remove the five screws, and remove the MCU PWB.
1)

C. Assembly procedure

For assembly, reverse the disassembly procedure.

8. Power section

A. List
No. Part name Ref.
1 Power PWB

B. Disassembly procedure

1) Disconnect each connector.
2) Remove the screw, and remove the earth line.
3) Remove two screws, and remove the power PWB unit.
4)
1)
1) 1)
2)
1)
3)
5)
4)
C. Assembly procedure
For assembly, reverse the disassembly procedure.
2)
1)
2)
3)
1)
2)
2)
2)
1)
AL-1661CS DISASSEMBLY AND ASSEMBLY 8 - 16

9. Duplex motor section (RSPF model only)

A. List
No. Part name Ref.
1 Duplex motor
B. Disassembly procedure
1) Remove the rear cabinet.
2) Remove two screws.
3) Remove the Duplex motor cover.
4) Remove the Duplex motor.
Note: When reassembling, be sure to engage the Duplex motor gear
with the belt on the main body side.
C. Assembly procedure
For assembly, reverse the disassembly procedure.
10. Reverse roller section (RSPF model
only)
A. List
No. Part name Ref.
1 Reverse roller
B. Disassembly procedure
1) Remove four screws
2) Remove the spring, and the earth wire
3) Remove the reverse unit.
2
3
1
1
3
2
1