Honeywell T8132A Owner's Manual page 16

The thermostat current
temperature setting does not
match the display
temperature to within ± 1°.
Incorrect zone temperature
showing on thermostat
display.
This equipment is a Class B digital apparatus, which complies with
• Check that the wiring hole in the wall behind the wallplate
was plugged with insulation to prevent drafts that could
adversely affect thermostat operation.
• Be aware that it is normal for the current setting and display
temperature to differ on occasion.
• During recovery from setback or setup, setting and display
temperatures can differ for up to 30 minutes after the
recovery period.
• The thermostat is factory-calibrated and cannot be
adjusted.
Canadian Radio Interference Regulations, CRC c.1374.
NOTICE
16
69-0803—1