Set Current Time/Day; Heating Program - Honeywell Electronic Programmable Thermostat Owner's Manual

IMPORTANT
Batteries are required for operation and
programming. When inserting batteries,
set the system switch to OFF. Remove
the battery door (on the thermostat left
side) using a coin at the bottom. See
Maintaining Your Thermostat section.

SET CURRENT TIME/DAY

To set the time, press and release the Set
Clock/Day key once. Press the Time keys until
the current time shows.
To set the day, press and release the Set
Clock/Day key again. Press the Time keys until
the current day shows. Press the Run Program
key.

HEATING PROGRAM

With the system switch at HEAT, press and
release the Set Schedule key once. WAKE,
Mon-Fri, and SET appear on the display.
Use Time keys to program WAKE time and
Temp keys to program WAKE temperature for
Mon-Fri. Repeat sequence for LEAVE, RE-
TURN, and SLEEP.
USE TO SET
WARMER TEMPERATURE
USE TO SET
TIME EARLIER
USE TO
SET CURRENT
DAY AND TIME
USE TO SET
PROGRAM PERIOD
6
LCD DISPLAY
AM
TU
LEAVE
Auto On System Cool Off Heat
Fan
USE TO
USE TO SET
SET COOLER
TIME LATER
TEMPERATURE
69-0862—2
RUN
PROGRAM
KEY
HOLD
TEMP
KEY
M8473