Honeywell CT3611 Owner's Manual page 14

NOTE: Program times are in 15 minute intervals. For example, 8:00, 8:15, 8:30.
q Press or until the desired wake temperature displays.
The setpoint temperature range is 40°F to 90°F (7°C to 31°C) for heating and 45°F to 99°F (9°C to 37°C) for cooling.
Heat/Cool
q Press to switch between setpoints.
Settings
NOTE: Program times are the same for heating and cooling.
q Press or until the display shows the desired temperature setpoint.
q Press ,
Leave
Return
q Repeat each step in Program the First Day for the rest of the week.
NOTE: After the first day is programmed, you can copy that day to any other day using procedure in Copy a Day.
Run
q Press when the entire week is programmed.
Program
Copy a Day
Your thermostat can copy program settings from one day to another.
q Press ,
Leave
Wake
q Press until the display shows the day you want to copy.
Day
q Press . The display shows.
Copy
q Press until the display shows the day you want to copy to.
Day
69-1081—3
or and repeat these steps for each program period. The first day is now programmed.
Sleep
, or to enter programming mode.
Return Sleep
14
Mon
M13327
Mon Wed
M13328