Honeywell CT3300 Installation Quick Manual page 2

Programming Quick Guide
Model CT3300
Program the CT3300 Thermostat before or after the thermostat is mounted to the wall.
Simply insert batteries (see Installation Quick Guide) to activate.
Open thermostat cover to access programming buttons and system switches.
Set Current Time and Day
Set
Press once; press Time
Clock/Day
day is displayed. Press
Heating Program
Set System switch to Heat. Press
Repeat for LEAVE, RETURN and SLEEP.
Weekend
Press until Sat. - Sun. appear in display . Press Time
Schedule
Repeat for SLEEP.
After programming is finished, Press
Cooling Program
Set System switch to Cool. Repeat each step in the Heating Program to set cooling program.
For additional information refer to the Programming and Installation Instructions or contact Honeywell Customer Relations at
www.honeywell.com/yourhome or 1-800-468-1502.
69-1550 6/01 Copyright © 2001 Honeywell
Ahead
until current time is displayed. Press
Back
Run
.
Program
Weekday
once. Press Time
Schedule
Run
.
Program
Printed in USA
Set
again; press Time
Clock/Day
Ahead
Warmer
and Temp
Back
Cooler
Warmer
Ahead
and Temp
Cooler
Back
Ahead
Back
to program WAKE for Mon. - Fri.
to program WAKE for Sat. - Sun.
until current